What tools should I take out on the road?

From Ninja250Wiki
Jump to: navigation, search

Some people make do with a cell phone and a credit card. Then there's the other extreme, listed below. Somewhere in the middle is probably right for you.

  • 3/8 ratchet wrench
  • 3/8 sockets 6,7,8,9,10,11,12,13,14,16,18,22,24
  • big wrench (24mm) for rear axle, and 17mm for right side
  • RoboGrip pliers
  • wire cutter
  • needle nose pliers
  • vise grips
  • battery volt tester
  • 2 wrenches (10/12mm and 10/11mm)
  • stick on wheel weights
  • spark plug gap tool
  • feeler gauges
  • zip ties
  • hose clamps
  • cable luber tool
  • sand paper/metal file/diamond file
  • tire worm plugs small/tire worm plugs large/plugging tools (insert and file)
  • Or: Stop & Go Pocket Plugger
  • screw drivers: phillips/flat and small combo
  • small roll - wire/cable
  • small roll - electrical tape
  • JB WELD
  • steel epoxy putty
  • long hex set 4/5/6mm
  • hex bit set various
  • washers/bolts all sizes
  • few pieces scrap sheet metal
  • spare turn signal bulb
  • tire valve caps
  • tire valve core tool
  • tire valve core spare
  • tire pressure gauge
  • tire pump electric
  • tire pump adapter to air mattress
  • various cotter pins
  • spare fuses
  • small bottle cat crap (anti-fog for shield)
  • spare cable holder ring thing
  • spare clutch cable
  • spare bolt clips for fairings
  • spark plug tool from stock bag
  • stock tool bag
  • Bucket Boss tool bag to hold everything