Installing Blazer Flushmounts: Difference between revisions
No edit summary |
No edit summary |
||
| Line 40: | Line 40: | ||
[[image:bl-10.jpg|150px]] | [[image:bl-10.jpg|150px]] | ||
Use the original signal wires if you can. Connect to the stock wires using crimp connectors and [http://faq.ninja250.org/wiki/Installing_connectors_for_your_wiring#Using_heat_shrink_tubing_to_cover_exposed_wire heat shrink tubing]. | Use the original signal wires if you can. Connect to the stock wires using crimp connectors and [http://faq.ninja250.org/wiki/Installing_connectors_for_your_wiring#Using_heat_shrink_tubing_to_cover_exposed_wire heat shrink tubing]. Keep in mind that whatever kind of connectors you use, you'll need to be able to unhook the turn signal wires to be able to remove the fairing. | ||
[[Image:Crimp connectors.jpg|100px]] | [[Image:Crimp connectors.jpg|100px]] | ||